RCTimer
5 PAIRS 26G DIGITAL TAIL SERVO D9257(1520US) FOR ALIGN T-REX 500
| Model | TS-D9257 |
| Dimension | 35.5mm x 15.0 x 28.6mm |
| Weight | 25g |
| Stall torque(4.8v) | 3.8 kg-cm |
| Stall torque(6v) | 4.2 kg-cm |
| Operating speed(4.8v) | 0.08sec/60° |
| Operating speed(6v) | 0.07sec/60° |
| Operating voltage | 4.8v-6v |
RCTimer
4060BB FET SERVO 40G / 7KG / 0.19 SEC
| Model | TS-4060BB |
| Operating Voltage | 4.8V ~ 6.0V |
| Idle current | 200mA at 4.8V ,250mA at 6V |
| Operating speed | 0.16 sec/60 @ 4.8V,0.19 sec/60 @ 6V |
| Stall torque | > 6.3 kg-cm 4.8V,7kg-cm at 6V |
| Weight | 40 g |
| Size | 40.8*20.1*38.0mm |
| Connector wire length | 180cm |
| Drive | FET |
RCTimer
3630BB FET SERVO 36G /3KG / 0.19 SEC
| Model | TS-3630BB |
| Operating Voltage | 4.8V ~ 6.0V |
| Idle current | 4mA |
| Operating speed | 0.16 sec/60 @ 4.8V,0.19 sec/60 @ 6V |
| Stall torque | > 3 kg-cm 4.8V |
| Weight | 36 g |
| Size | 40.8*20.1*38.0mm |
| Connector wire length | 180cm |
| Drive | FET |
RCTimer
KKMULTICONTROLLER V5.5 CONTROLLER BOARD
| Brand | Unit |
| Weight | 0.050 kg |
| Features | V2.3 |
| Score | 13 Â |
| Default | X mode |
Features: - Simple structure, Easy to Maintain and Debug Control - With 3 pcs gyros, relying on potentiometer adjust gyro sensitivity. - Full servo signal output, support normal ESC / analog servo - Support for single-axis / UFO, Y3 3-axis, Y4-type 3-axis, 4 axis, 6 axis, V22 flight mode - Supports 4-axis "+" and "X" flight mode, support for six-axis "HEXA6" and "Y6" flight mode. - Don't need MK 4-axis PPM decoder board, the receiver can be connected directly to the Transmitter 　,
Package included:　 - 1 x 4-axis Circuit Board 1 Sets ...RCTimer
4 SETS CBS002
| http | //www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=549&productname |
| http | //www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=146&productname |
| http | //www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=330&productname |
| http | //www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=331&productname |
| http | //www.rctimer.com/index.php?gOo=goods_details.dwt&goodsid=512&productname |
Package:, 16 x 2830-14 750KV With 50cm Cable Outrunner Brushless Motor,
= 16 x ESC 30A Brushless Motor Speed Controller = ...RCTimer
HBC1016 CNC HV BRUSHLESS DIGITAL SERVO 16KG/70G/0.1SEC
| *Model. | HBC1016 |
RCTimer
HBP0405 HV BRUSHLESS DIGITAL SERVO 5.1KG/65G/0.04SEC
| *Model. | HBP0405 |
RCTimer
HBP0815 HV BRUSHLESS DIGITAL SERVO 15KG/65G/0.08SEC
| *Model. | HBP0815 |
RCTimer
HBC0815 CNC HV BRUSHLESS DIGITAL SERVO 15KG/70G/0.08SEC
| *Model. | HBC0815 |
RCTimer
HBC0405 CNC HV BRUSHLESS DIGITAL SERVO 5.1KG/70G/0.04SEC
| *Model. | HBC0405 |
RCTimer
HVSK-40A MULTICOPTER BRUSHLESS ESC 40A (OPTO)
| SimonK Firmware | tgy_debug.hex |
| Lipo | 2-6S |
| Continuous current | 40A |
| Instant current(10S) | 60A |
| BEC type | N/A |
| BEC output | OPTO |
| Battery cell | Li-io Li-poly 2-6S; NiMH NiCd 5-21 |
| Weight | 29g |
| Dimension L*W*H | 66*26*13mm Included the Deans |
| 5. Supported motor speed (Maximum) | 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles). |
| Note | This ESC don't included manual. |
| Package | 1* 40A ESC |
Features:, 1. Drive tube and high-power Mos, and Mos tube plus a separate heat sink, extreme low output resistance of the PCB(printed circuit board), super current endurance., 3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start themotor immediately, to avoid personal injury., Product Function Illustrate:, The ESC of multi-copter brushless motor is special design for multi-copter aircraft, Throttle curve freely set and remove the brake function. To let player get a good throttle linearity. Wide voltage range can be configured to be compatible with a variety of brushless motor market.,
RCTimer HVSK-40A High Voltage OPTO Brushless ESC The code used ...RCTimer
MULTIWII STANDARD EDITION FLIGHT CONTROLLER V2.0
| •Dimension | 40mmX40mm |
| •Height | 11.6mm |
| •Weight | 9.6g |
| •Fixing hole spacing | 35mm (It can be changed to 45mm by CRIUS Distribution Board) |
| •Hole diameter | 3mm |
| http | //www.multiwii.com |
Features:, •Small size,35x35mm mounting holes,
Multiwii MWC SE Flight Control Board V2.0 •6 input channels ...RCTimer
AIOP V2.0 ALL IN ONE PRO FLIGHT CONTROLLER
| http | //www.youtube.com/watch?v=Emf7WAa0YcY&sns=em |
| http | //vimeo.com/47677259 |
| http | //www.youtube.com/watch?v=OkkoudNBIQc |
| Dimension | 50mmX50mmX |
| Weight | 14.5g |
| Fixing hole spacing | 45mm |
| Hole diameter | 3.1mm |
| http | //www.rctimer.com/download/Crius_AIOP_Manual_MWC.pdf |
Video:, Hardware Features:, ,
ALL IN ONE PRO Flight Controller v2.0 Deal of Day, ...RCTimer
AIOP-UAV 433MHZ AUTOPILOT GPS FLIGHT CONTROL SYSTEM
| Baud rate | 9600 |
Hardware Features:, •Supported MegaPirateNG /ArduCopterNG/ArduPlaneNG/MultiWii/AeroQuad firmware, It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., GPS CN06 Features:, ,
AIOP V2.0 UAV 433Mhz Autopilot GPS Flight Control System Deal ...RCTimer
AIOP-UAV 915MHZ AUTOPILOT GPS FLIGHT CONTROL SYSTEM
| Baud rate | 9600 |
Hardware Features:, •Supported MegaPirateNG /ArduCopterNG/ArduPlaneNG/MultiWii/AeroQuad firmware, It's designed as an open source Xbee replacement radio set, offering a lower price, longer range (approx one mile) and superior performance to Xbee radios. It’s available in 915Mhz ; and in the following configurations:, serial board (for the air) and USB (for the ground)., GPS CN06 Features:, ,
AIOPV2.0-UAV 915Mhz Autopilot GPS Flight Control System Deal of Day! ...